6
4.2
1T-CT-445 Transmitter
1. Connect the source device’s video output to the VIDEO IN connector of the
Transmitter, using the appropriate cable. The 1T-CT-445 has a VIDEO OUT
connector that can provide a loop-thru signal to a local monitor.
2. The 1T-CT-445 Transmitter has RS-232 control capabilities. Connect an RS-232
cable to the RS-232 Input at this time if you are using this functionality.
3. Connect a Cat.5/5E or Cat.6 cable to the UTP OUT connector of the Transmitter.
The 1T-CT-445 Transmitter supports transmission distances of up to 300 meters
(1,000’) of CAT.5/5E or CAT.6 premium grade network cables as described in
4.1 above. Receiver model determines the maximum transmission distance of
either 150 meters (500’) or 300 mete rs (1,000’.) See section 2.2 above for
details.