TVLogic VFM-058W, Operation Manual

Page: 16 / 36

FHD
Vie
wfinder M
onit
or 16
•
C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the max Y’ level
will blink on the screen, and be displayed in
red on the Waveform.
•
Y Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
•
C Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
• Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds the
selected values of Y MAX, Y MIN, C MAX and C
MIN shall blink.
* In the case of RGB input, Range Error is not
supported.
* See section “7. Other Function [7] Range Error”
for more information.
• Y Max
- Used to set the maximum Luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink on the screen, and be displayed in
red on the Waveform.
•
Y Min
- Used to set the minimum Luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink on the screen, and be displayed in
red on the Waveform.
•
C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the max Y’ level
will blink on the screen, and be displayed in
red on the Waveform.
[5] Waveform
5. Menu Operations