manualshive.com logo in svg

TVLogic LVM-176W, Operation Manual

Share
Download
TVLogic LVM-176W Operation Manual Download Page 16

16  Multi Format LCD Monitor   

 

●

[APERTURE] Knob

- Used to adjust the picture sharpness. The   

  value is selectable between 0~24. 

- It is not available in DVI ANALOG.

  

 

●

[BRIGHT] Knob

- Used to adjust the degree of brightness. The  

  value is selectable between -100~100.

 

●

[CONTRAST] Knob

- Used to adjust the contrast. The value is    

  selectable between -100~100.

 

●

[USB]

- Updates new firmware and color calibration. 

 

●

[OPERATE] Lamp

- Indicates the status of power connection and  

  monitor operation. 

- The LED is off with power off. 

- The LED is red when the monitor is in waiting  

  mode with power on. 

- The LED is green when the monitor is  

 

  operating.  

 

●

[POWER] Button/Lamp

- Turns on or off the monitor power. 

 

●

[TALLY] Lamp

- Tally lamp that can be toggled in green or  

  red using the REMOTE(RJ-45) port.

  

3. Controls & Functions

LVM-246W : FRONT

Summary of Contents for LVM-176W

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands