TVLogic LVM-173W-3G, Service Manual

Page: 42 / 57

42
K-10, i1 Display3 Setting Dialog
Fig 14 Device Setting
※
Once the Device Se tti ng is completed, above pop-up will not appear again.
If you want to re-set the op ti ons, enter the [Se tti ng] menu and select the
[Calibra tion] tab and then press the “Set” bu tt on on [Measure Device].
14.17 CABLIBRATION S/W INSTALLATION
When the K-10 or i1 Display3 is connected to PC for the fi rst ti me, the “Device Se tti ng” pop-
up appears as shown above. (Fig 14)
Default LCD
This channel is used for color calibra tion of normal LCD display which is CCFL backlight type.
LED B/L LCD
This channel is used for color calibra tion of LED backlight type displays like XVM-245W.
OLED
This channel is used for color calibra tio n of OLED panel equipped displays like LEM-150 and
TDM-150W.
WCG-CCFL
This channel is used for color calibra tion of LCD display which is Wide Color Gamut – CCFL
backlight type.