13
LV
M-171W / 241W / 401W / 461W / 571W
· Brightness
This item controls the degree of brightness between MAX(50) and MIN (-50) range.
· Contrast
This item controls the contrast ratio between MAX(100) and MIN(-100).
· Chroma
This item controls saturation between MAX(50) and MIN(-50).
· Phase
This item controls PHASE value (Tone) between MAX(50) and MIN(-50). However, it is
only available on COMPOSITE and S-VIDEO among ANALOG modes.
· APERTURE
This item controls the picture sharpness. Sharpness selection is between MIN(-1) and
MAX(5).
· NTSC SETUP
This item sets IRE value in NTSC mode between 0 IRE and 7.5 IRE.
· SDI FORMAT
This item selects input SDI format between single link and dual link SDI.
· SDI SAMPLING
This item selects input SDI sampling mode between YCbCr and RGB for Dual Link Signals.
· FILTER
This toggles the 4:4:4 Video Processing Filter On/Off. To eliminate ringing artifacts in
4:2:2 sources please set this Filter to OFF.
· ORBITER CIRCUIT
This item is available to prevent TIR on static images displayed on screen for extended
periods of time. Most scenarios do not require an orbiter circuit as TIR does not occur
easily/rapidly. However, for some Multi-Viewer type applications this mode may be
desirable. The orbiter value can be set between 1 and 100 (number of pixels image is
scaled down). The image will move onscreen every 10 minutes.
