8 Multi Format LCD Monitor
3. Controls & Functions
FRONT
•
• [SOURCE] Button/Lamp
- Used to select desired Source input.
- Press the button to activate the source input
menu-selection, then use UP and DOWN
button to select desired input.
* See section “Other Functions [1]SOURCE
Button” for more information.
•• [F1][F2][F3][F4] Button/Lamp
- Used to activate the function.
* See section “6.Button Functions -> [4]
Function key set button” for more
information.
•
• [MENU/EXIT] Button
- Used to activate the OSD menu.
- When the OSD menu is activated, press this
button to exit from the menu.
•
• [OPERATE] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green
LED light.
- Restores to previous state when monitor
power turns off and comes back on.
•
• [POWER] Button
- Used to turn power on and off .
•
• AUDIO OUT (Phone Jack)
- Used for Stereo Audio Output through Phone
Jack. (video signals with embedded audio only)
•
• PGM (USB)
- This terminal is used to upgrade the fi rmware
or color calibration made by TVLogic.
•
• [TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the Tally in of the DC IN.
•
• [ADJUST] Knob
- Available functions are [VOLUME]-
[CHROMA]-[APERTURE]-[PHASE]-[FOCUS
LEVEL].
•
• [UP/DOWN/ENTER] Knob
- Used to move within the menu when OSD
menu is activated, and is also used to
decrease or increase the value of the selected
feature.
- Press the knob to select the main menu and
sub menus.
- When the osd is deactivated, the knob used to
decrease or increase the value of volume
