TVLogic LUM-310R, Operation Manual

Page: 18 / 32

18 4K LCD Monitor
●
Monitor ID
- This item sets the ID of each monitor for the
TVLogic control protocol using RS-422/485
communication.
- Available values are 0~127.
●
DHCP
- Used to activate/deactivate the DHCP
function.
●
IP Address
- Used to set the IP Address connected to a
Monitor.
●
Subnet Mask
- Used to set the Subnet Mask connected to a
Monitor.
●
Gateway
- Used to set the Gateway number connected
to a Monitor.
●
Port NO
- Used to set the port number of the monitor.
●
Apply Settings
- Use to apply changed value of IP Address,
Subnet mask, Gateway and Port no.
●
UMD DISPLAY
- Used to set UMD and ANC.
- Available modes are OFF, UMD and ANC.
* UMD : Displays user customized 8
characters on screen.
* ANC : Displays characters embedded in
SDI signal.
●
UMD CHARACTER
- Used to customize the characters for Under
Monitor Display.
- Alphabets, numbers and special symbols are
available.
- Maximum of 8 characters are available.
●
UMD character color
- Used to set the character color of UMD.
(White, Red, Green, Yellow, Cyan, Magenta)
- Activates only when the [D-UMD tally type]
is set to [Default], [User color], [BG. Color],
[User tally] or [User BG.].
●
UMD B.G. trans.
- This function sets the transparency of the
UMD character’s background box.
- Available modes are OPAQUE, 50%, 85% and
100%.
●
UMD size
- This function adjusts the size of UMD FONT.
- Available modes are SMALL and LARGE.
[3] GPI
5. Menu Operations