Assembly Instructions
7
Step 4
Fittings you will need for this step:
Drawer runner
# # 41435 X2
Flat head screw
# 26020 X4
Flat head screw
# 25233 X2
6
Front
Place drawer runners
1.
Extend drawer glide
41435
.
2.
Attach drawer glide at the
front of divider panel
G
.
Place screw
26020
through the correct hole
at the front of the drawer
glide, into the holes on
divider panel
G
.
Tighten screw but do not
overtighten.
3.
Open slide until holes
are visible at back of
drawer glide.
4.
Place screw
26020
through the correct holes
at the back of the drawer
glide, into the holes on
divider panel
G
.
Tighten screw but do not
overtighten.
5.
Attach the fl at head
screw
25233
into the
correct holes of the
drawer glide, into divider
panel
G
.
Tighten screw but do not
overtighten.
Repeat these
5
steps for
the remaining runner on
the other side of divider
panel
G
.
G
