TVILUM-SCANBIRK Performance 80729, Assembly Instruction Manual

Page: 59 / 110

59
7 OPERaTING THE TaBLE
• Make sure there are no items near the table which can obstruct the movements of the table.
• Both switches must be activated simultaneously in order to make the table go up or down.
8 GOOD aDvICE
• When working standing up, you relieve the pressure on your back and lower back and you can use
your whole body . Your freedom of movement will increase and you may vary your working
positions .
• Use the height adjustment feature several times daily if only for a small adjustment when changing
between working at the screen or reading and writing .
• If you do not use the table for a while, you can switch off the power for safety reasons and in order
to save money .
9 maINTENaNCE /CLEaNING
• Clean the table with a damp cloth using an ordinary cleaning detergent. Keep water away from the
electrical parts . The height adjusting system does not need maintenance .
10 DISPOSING OF THE TaBLE
• The packaging is 100% recyclable and should not be left in the environment. Disposal of the table
must take place in accordance with the requirements in your area.
• The table is made of recyclable materials. Disposal of it must take place in accordance with the
waste disposal requirements in your area.
11 STaTEmENT OF CONSENT
EU STaTEmENT OF CONSENT
Manufacturer:
Tvilum-Scanbirk
Egon Kristiansens Allé 2
8882 Fårvang
Denmark
Tel .: 0045 8757 3600
DECLaRE THaT THE PRODUCT
Series: Performance
Model no .: 80729
With table top model no .: 80702, 80703, 80706, 80707 or 80708
Type: Office desk
Label year: 2008
IS IN aCCORDaNCE WITH:
Directive 2004/108/EC of The European Parliament and of the Council of 15 December 2004 on
approximation of the laws of the Member States relating to electromagnetic compatibility
Directive 2004/108/EC of The European Parliament and of the Council of 12 December 2006 on the
harmonisation of the laws of the Member States relating to electrical equipment designed for use
within certain voltage limits
Directive 98/37/EC of The European Parliament and of the Council of 22 June 1998 on the
approximation of the laws of the Member States relating to machinery .