R 166202 | Rev. D | Page 2 of 13
www.tvilight.com
TVILIGHT PROJECTS BV / Beechavenue 162-180, 1119 PS, Schiphol-Rijk, the Netherlands
[email protected] / www.tvilight.com
ATTENTION:
In order to function properly, OPENSKY Zhaga IoT
must
be
connected to a dimmable DALI driver/ ballast (preferably D4I
or SR compliant).
NOTE: Some dimmable drivers/ballasts
must
be
programmed/set to DALI mode. Also, select the correct
configuration (i.e. DALI) from the CMS. If this has not been
done, OPENSKY Zhaga IoT will not be able to dim the
connected armature.
DALI (logarithmic) dimming mode is recommended.
