17
4.2
Flow Chart 2
Ensure ‘Log 1’ operation mode is selected.
To set ‘Log 1’, press and hold the ‘Reset’
button for 5 seconds. The ‘Setup’ screen
will be displayed.
For ‘Log 1’, use the ‘Up’ / ‘Down’ buttons
to set the log duration to ‘000 s’.
To exit the ‘Setup’ screen, press the
‘Reset’ button. The main screen will be
displayed.
Select the gas mix required on the main
screen by pressing the ‘Up’ / ‘Down’
buttons.
Insert the welding torch nozzle into the
GFM2 nozzle and purge gas. The gas flow
will display in LPM whilst gas is flowing.
The GFM2 will display the peak flow
achieved when the gas flow stops, and the
gas consumed.
To save the displayed data, press the ‘Log’
button.
Reset the displayed data by pressing the
‘Reset’ button.
Power On