BLOBbox User Manual V. std 0.6.105 - 101
HOW TO RESET THE BLOBBOX TO FACTORY SETTINGS
1.
If the BLOBbox is on, turn it off using the on-off button on the back of the
box.
2.
Wait a few seconds, then turn on the BLOXbox using that same on-off
button.
3.
When the BLOBbox LED turns red, press and hold the number 0 key of the
remote control for approximately 10 seconds until the LED turns green.
4.
Wait for the BLOXbox to restart.
5.
Select the desired language and press SAVE (red button). If you select a
language other than English, you will be prompted to restart the BLOBbox;
press RESTART (red button) to activate the change in language.
6.
Enter the bandwidth limits of your Internet connection and press SAVE
(red button).
7.
When the BLOBbox Home Page appears, press SIGN IN/SUBSCRIBE (green
button). Enter your credentials that were provided in the BLOBbox
package (i.e., NICKNAME, TVBLOB NUMBER and PIN).
8.
Turn off the BLOBbox using the on-off button at the back of the box.
9.
Turn on the BLOBbox using the same on-off button.
10.
To modify other BLOBbox settings, read the “CONFIGURING YOUR
BLOBBOX” chapter.
