TVB Tech 3199F, Operation Manual

Page: 6 / 16

5
[ INSTALLATION ]
To reduce the risk of serious injury during use, follow these procedures for proper assembly.
1. Install Camera Head
Put the cable into the hook of the handle, (Figure 7.) Hold the cable connector in one hand, then screw the
camera and fix it on the cable tightly. (Figure 8.)
2. Install aviation cable
Plug the cable into the socket of the panel and screw
tightly. (Figure 9.)
HOOK
CABLE
Figure 7. Cable reel in the case
CABLE
CAMERA HEAD
Figure 8. Assembly/Disassembly Camera
Figure 9. Install aviation cable
3. Install power
cable
C o n n e c t t h e p o w e r
c able t o b a t t er y and
panel. (Figure 10.)
Figure 10
.
Install power cable
4. Install guide fitting
Support Guide are designed to help position the camera towards the middle of the pipe. There are 2 kinds of
guides, choose guides properly per application requirement.
A. Installing 46 Support Guides.
Sleeve the camer a heads with 46 Suppor t guide.
(Figure 11.)
B. Install 80 Support Guides.
Mount the 80 support guide onto the stainless steel
camera head. Then tighten the screw by screwdriver.
(Figure 12.)
Screw 2X
Camera Head
D46 Applicable to 2”-3.5” pipe.
Support Guides
Figure 11. Install 46 Support Guides
Camera Head
Screw 2X
D80 Applicable to 3.5”-5” pipe.
Support Guides
Figure 12
.
Install 80 Support Guides