Connecting to a Television
For a basic connection from your
Set Top Box to the television, use
the SCART connection.
For the highest quality connection
use a direct HDMI connection, see
picture
First Time Installation
After all connections have been made properly, switch on TV and make sure the unit is connected to the Main Power.
Press Power button to switch the unit on. If you are using the unit for the first time or have restored the unit to factory
default, the inst
allation guide menu will appear on your TV screen. Select Antenna Power ‘On’ if you’re using Active
Antenna.
(1) [OSD Language] press RIGHT/LEFT key to select a language.
(2) [Province/Area] press RIGHT/LEFT key to select your province/area
of residence.
(3) [Antenna Power] press RIGHT/LEFT key to select antenna power on
or off.
(4) [Channel No.] press RIGHT/LEFT key to select a channel. For
selecting the channel, please find out on which channel the Digital TV
signal is transmitted in your living Area.
(5) Make sure the signal ‘quality bar’ and the “signal strength bar” is more
than 70% and up.
Press ‘OK’ to start to do channel searching.
(6) Once channel tuning is complete, you can start watching TV programs.
Troubleshooting
Problem
Potential Reasons
What to do
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen shows’ No
Signal’
Areal cable not connected
Plug in the Areal cable
Aerial cable is faulty
Check aerial cable and connections
No sound from
speaker
No or incorrect connection with SCART
/HDMI cables
Connect the cables correctly
The program is a radio program
Press <TV/Radio> key to shift into TV mode
Remote Control is
not responding
The battery is exhausted
Change battery
Remote Control is not facing or close
enough to the STB
Adjust the position of the Remote Control and
move closer to the unit
Picture is breaking
up
The signal is too weak
Check aerial, cable and connections, use signal
quality /strength meter as described above
The manufacturer reserves the right to change the configuration, technical or any other parameters without prior
notice.
