6
Next, study the front panel drawing below and become familiar with the control actions
explained in the Operating Section of this manual.
7.0
OPERATING THE UNIT
Pressing the Power On/Off switch allows the included AC Adapter to p12 VDC
operating voltage to the unit. The LED located to the right of the Power On/Off switch
will glow if power is present when the switch is pressed.
Note: Do not connect an AC adapter other than the one furnished with the unit or
damage may result that will not be covered by the warranty.
Connect a NTSC or PAL Video input to either input 1, input 2 or both inputs. Assuming
you are providing the unit with an NTSC or PAL composite video input(s) of the proper
level and signal format, you should see an image on the monitor when you select the
appropriate Video Input using the Video Input Select switch. If desired, you can connect
a Cable to the Video Output connector and loop the monitor’s image to another video
device at this time.
OSD
On/Off
Select/Adjust
OSD Items
Image
Reverse
Video Input
Select
Power
On/Off
Summary of Contents for LM-701M
Page 1: ...Instruction Manual LM 701M Color LCD Monitor...
Page 2: ......
