7
4.0 CONNECTING THE HARDWARE
Refer to the illustrations below. The first drawing is the front view of the LM-503HD
.
This drawing will allow familiarization with the overall layout the unit.
The next drawing shows the Input and Output connectors plus the DC Power Input.
Connect the cables from the desired source to the appropriate input of each monitor
then connect the furnished AC adapter and gently twist it 90 degrees to lock in position.
Lastly, if tally operation is desired, wire a mating DB-9 plug for the tally connector and
connect it to the monitor. To turn on the tally for display 1, connect pin 1 to pin 6 on the
connector, to turn on the tally for display 2, connect pin 2 to pin 7 on the connector and
to turn on tally for display 3, connect pin 3 to pin 8 on the connector.
