Multi Format LCD Monitor 21
●
MONITOR ID
- Used to set the ID of each monitor for the
TVLogic control protocol or DYNAMIC UMD
using RS-422 communication.
- Available values are between 0,1,2 ~ 124.
- Right screen in PBP mode is automatically set
to +1 of the monitor ID.
●
UMD DISPLAY (Under Monitor Display)
- Used to set input source ID mode.
- Available modes are OFF, UMD, ANC, D-UMD
(S-8C), D-UMD(S-16C) and D-UMD(D-8C).
- If the UMD menu is selected, characters or
tally data in the black bar displays on the
bottom of the screen. The vertical aspect
ratio of the image changes on the screen as
the bar appears at the bottom of screen.
- In the USER ASPECT mode, the UMD bar
displays semi-transparently and the screen
keeps its USER ASPECT ratio.
* UMD : Displays user customized 8 characters
on screen.
* ANC : Displays characters embedded in SDI
signal.
* D-UMD(S-8C) : Displays incoming data of 8
characters and tally signal from TSL protocol
(V3.1).
* D-UMD(S-16C) : Displays incoming data of 16
characters and tally signal from TSL protocol
(V3.1).
* D-UMD(D-8C) : Displays incoming data of
two pairs of 8 character strings and tally
signals from TSL protocol (V3.1).
- In PBP mode, even if D-UMD(S16C), D-UMD
(D-8C) and D-UMD(S-8C) are selected, only
D-UMD (S-8C) activates.
- In PBP mode, each D-UMD(S-8C) for left
screen and right screen are activated.
Adjustments for each setting are available.
●
UMD CHARACTER
- Used to customize the characters for UMD.
- Alphabets, numbers and special symbols are
available. (Max. 8 characters)
●
D-UMD TALLY TYPE
- Tally type configuration setting in D-UMD(D-
8C), UMD Display.
- Configuration values are DEFAULT, USER
COLOR, CHARACTER, BG .COLOR,
USER TALLY, USER CHAR and USER BG.
* DEFAULT : Existing TV Logic operating
system (VRT)
* USER COLOR : User configuration settings on
each TALLY color type.
- TALLY1 COLOR ~ TALLY4 COLOR are activated
when USER COLOR is selected.
- CHARACTER : Tally displays with the
character color. Activates the same as
Default model.
- BG. COLOR : Tally is displayed as the
background of character. Activate the same as
Default mode.
- USER TALLY : The bit0 & bit 1 of TSL Protocol
Control Byte receives the input signal and
displays Tally by user’s set (OFF, WHITE, RED,
GREEN, BLUE, YELLOW CYAN, MAGENTA)
- USER CHAR : This function activates in
the same way as USER TALLY and TALLY is
displayed by the character color.
- USER BG. : This function activates in the same
way as USER TALLY and Tally is displayed in
the background of the character.
●
TALLY1 COLOR ~ TALLY4 COLOR
- This item sets the color of each TALLY1,
TALLY2, TALLY3 and TALLY4 .
- Available color settings are Red, Green and
Yellow.
●
B0:0 B1:0 ~ B0:1 B0:1
- The Byte0, Byte1 of TSL Protocol Control Byte
sets the color of the input conditions.
- Available colors are OFF, WHITE, RED, GREEN,
BLUE, YELLOW, CYAN and MAGENTA.
LVM-327W
SDI A
[5] GPI
5. Menu Operations
PAGE II >> PAGE III
MONITOR ID
UMD DISPLAY
UMD CHARACTER
D-UMD TALLY TYPE
TALLY 1 COLOR
TALLY 2 COLOR
TALLY 3 COLOR
TALLY 4 COLOR
O
OFF
CHANNEL L1
DEFAULT
OFF
OFF
OFF
OFF
1080/60i
LVM-245W_327W_V2.0_EN.indd 21
2014-04-10 오후 2:01:56
