background image

2

 

Hrs

Page 1 of 20

USB CHARGER IS FITTED TO

EACH SIDE OF HEADBOARD

USB CHARGING SOCKET

PLUG A STANDARD USB INTO THIS 

SOCKET TO CHARGE ANY DEVICE 

5V 2.1A in Total

NOTE THIS USB IS FOR CHARGING 

ONLY, CANNOT PLAY MUSIC OR 

VIDEOS THROUGH THE SYSTEM.

PRESS BUTTON ON REMOTE CONTROL (RC) IN EITHER MODE.

i) SELECT BT; PLEASE RAISE VOLUME ON DEVICE TO HIGH LEVEL THEN ADJUST RC.

ii) SELECT OPTICAL; PLEASE MUTE TV SPEAKERS FOR BEST RESULTS.

ONE MAY OCCASIONALLY NEED TO ADJUST TV SETTINGS FOR EXTERNAL SPEAKERS, 

THIS DEPENDS ON THE MAKE OF TV, PLEASE CHECK THE TV USER GUIDE. 

ADJUST BASS - THIS BUTTON LIMITS LOWER FREQUENCIES OF THE SOUND

ADJUST BASS ATTENTUATION TO SUIT THE SOUND EFFECT YOU LIKE

ADJUST TREBLE - THIS BUTTON LIMITS HIGH FREQUENCIES OF THE SOUND

ADJUST TREBLE ATTENTUATION TO SUIT THE SOUND EFFECT YOU LIKE. 

NOTE IF YOU REDUCE LEVEL OF THE HIGHER FREQUENCIES, SOUND VOLUME IS 

REDUCED - THIS IS NORMAL.

SELECT BT (BLUETOOTH) - DEVICE  INPUT - TO PAIR LOOK FOR "BT SPEAKER" 

SELECT OPT (OPTICAL) SOUND OUTPUT TO TV

WHEN FINISHED WATCHING TV, PRESS RC DOWN BUTTON TO SEND TV BACK 

DOWN TO REST POSITION, TV SWITCHES OFF AUTOMATICALLY.

PRESS ON/OFF FOR THREE SECONDS TO SWITCH WHOLE SYSTEM OFF.

ADJUST VOLUME

PARIS OTTOMAN TV BED

ASSEMBLY INSTRUCTIONS

NOTE THAT IF TV IS IN THE UP POSITION AND SWITCHED ON, TV PICTURE IS 

SHOWING, IT IS NOT SWITCHED OFF WHEN BLUETOOTH IS SELECTED.

TO REMOVE PICTURE, TURN OFF TV OR PRESS THE DOWN BUTTON TO LOWER 

TV TO THE REST POSITION WHERE FOR SAFETY, POWER TO TV IS 

DISCONNECTED AUTOMATICALLY - BT MUSIC CAN STILL PLAY THOUGH. 

An instructional video of the Operation of the Ottoman Lift Up system is available via YouTube 

using  the following address: https://youtu.be/hyq4zm7h_yU

BLUE

Lights when Bluetooth is Selected.

RED 

Lights when System is 

switched on and ready to Use

SOUND SYSTEM CONTROL

TV Lift Controls

Audio Controls - see below

To turn system on, press this On/Off button for 3 seconds. 

At end of watching TV, lower the TV to it's resting position and TV 

will switch off automatically. Music  can still be heard so to switch 

system off, press On/Off again for 3 seconds.

If Media Tray is wanted on 

the left side, fit side rail (3) 

to left and (4) to right.    

If Media Tray is wanted on 

the right side, fit side rail (3)

to right and (4) to left.  

(4)

(3)

(4)

(3)

Please note that the headboard speakers 

are linked to the soundbar so the 

whole system is controlled by the

adjustments to the audio remote.

REMOTE CONTROL FOR AUDIO & TV LIFT

20072

7

Summary of Contents for PARIS OTTOMAN TV BED





















Reviews: