Smart door lock dimensions
Dual latch lock body installation diagram
1. Make sure the door opening direction
When stand outside of the door and face to the door:
The door hinge is in the left side then means left opening door.
The door hinge is in the right side then means right opening door.
When install the door, you should follow up the door opening direction to adjust the lock handle
direction and latch direction
2. Change the mortise direction (Change direction)
When install the door mortise, the latch bolt should be in the
above side and dead bolt in the down side. The slope side of
the latch bolt face to the door lock direction. Otherwise,
should adjust the latch direction. The method of the adjusting
the latch direction as below:
1) Put the lock mortise latch bolt to the down side. Refer to the Pic 2.
2) Put force your strength to make the latch bolt lower down the side panel and turn over the
stop block to 180degree. Refer to the Pic 2.
3) Put the latch bolt into the latch bolt hole is ok. Refer to the Pic 3.
