18
·
Name
Assign a custom name for the sensor
·
Type
This Type label tells the users how to respond to the alarm
·
Mode
The mode controls how and when this sensor would trigger the alarm. (See next
page)
·
Zone
Change the Zone number where the sensor is located.
When the alarm is triggered,
the system will report the Zone number
that was triggered, as well as the name of the accessory that
triggered the alarm
. (For example:“Zone 01, Smoke Alarm.")
Grouping your accessories into Zones will make it easy to tell where an
alarm has been triggered for systems with multiple accessories.
·
Siren
Choose whether this sensor will cause the sirens to sound or not (silent
alarm).
·
Chime
- ideal for small businesses.
If Chime is enabled and the system is disarmed, the panel will play a chime sound
when this sensor is triggered.
·
Delay
If the delay is not set to zero, then the system will wait before the alarm is
triggered(Entry Delay). This gives you time to go to the main panel and disarm
the system before the alarm is triggered.
