background image

                                                                                                                 

TCLWRQS1 Datasheet

 

Hangzhou Tuya Information Technology Co., Ltd.  13 

V2.0.0 

environment. This equipment should be installed and operated with minimum distance 20cm between the 

radiator and your body. 

Important Note 

This radio module must not installed to co-locate and operating simultaneously with other radios in host 

system except in accordance with FCC multi-transmitter product procedures. Additional testing and 

equipment authorization may be required to operating simultaneously with other radio. 

The availability of some specific channels and/or operational frequency bands are country dependent 

and are firmware programmed at the factory to match the intended destination. The firmware setting is 

not accessible by the end user. 

The host product manufacturer is responsible for compliance to any other FCC rules that apply to the 

host not covered by the modular transmitter grant of certification. The final host product still requires Part 

15 Subpart B compliance testing with the modular transmitter installed.   

The end user manual shall include all required regulatory information/warning as shown in this manual, 

including: This product must be installed and operated with a minimum distance of 20 cm between the 

radiator and user body.   

This device have got a FCC ID

2ANDL-TCLWRQS1.The final end product must be labeled in a visible 

area with the following: 

Contains Transmitter Module FCC ID:2ANDL-TCLWRQS1

   

This device is intended only for OEM integrators under the following conditions:   

1)The antenna must be installed such that 20cm is maintained between the antenna and users, and 

2) The transmitter module may not be co-located with any other transmitter or antenna. 

As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM 

integrator is still responsible for testing their end-product for any additional compliance requirements 

required with this module installed. 

 

Declaration of Conformity European notice 

 

 

 

Hereby, Hangzhou Tuya Information Technology Co., Ltd declares that this module 

product is in compliance with essential requirements and other relevant provisions 

of Directive 2014/53/EU,2011/65/EU.A copy of the Declaration of conformity can be 

found at https://www.tuya.com 

Hereby, Hangzhou Tuya Information Technology Co., Ltd declares that this module 

product is in compliance with essential requirements and other relevant provisions 

of Directive 2014/53/EU,2011/65/EU.A copy of the Declaration of conformity can be 

found at https://www.tuya.com

 

Summary of Contents for TCLWRQS1















Reviews: