4.1 To get started, you will need:
• A Tuya Zigbee Gateway
• A mobile phone with the specified APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's
manual).
2. Ensure that the sensor is within the signal range of the
gateway, and install the sensor with two pcs AAA battery,
then press reset button for 5 seconds, and green light will
start flashing which means the device will automatically
enter the network configuration mode.
3. Wait for the sensor to be automatically added to the
gateway. If the green light stops blinking, the gateway is
successfully added.
NOTE:
If the adding is failed, please reset the sensor and try
again.
Configure Network
4