Advanced Settings
"admin"mode
Emitter channel shows slow flash
1.Motor reversing
The running direction of the blinds is oppsite to what shows on the emitter button.
2.Delete emitter matches
"user"mode
In user mode,you can operate and use this product normally without worrying about any
misoperation to the motor.
Add a new emitters
A motor can match one or more emitters
emitters need to be matched. See“emitter quick matching”
There's a quick way to copy it
(1) The switch selects“user”mode.
(2) Operate matached emitter.(Select the channel you want to copy.)
Press"S" 1 time, motor rotates once
Press"S" 1 time again, motor rotates once
(3) Operate emitter to be added.(Select the channel you want to add)
Press"S" 1 time, motor rotates once
Copy complete. Repeat 1-2, delete emitter.
Method 1
Press both
together until the
motor rotates
once
Method 2
Press M key 10”
motor rotates
the third time
Motor”M”Key
Operation
Repeated short press
Press for 2”
Press for 5”
Turn-Stop-Turn-Stop
Circular motion
Press for 10”
Motor reversing
Press for 15”
Restore the factory
Emergency use in
case of travel
The motor feedback
Function
Motor rotates once
Motor rotates twice
Motor rotates three twices
Motor rotates four twices
The motor enters the
matching state
/
Motoranzeige
light
Indicator status
Slow flash
Reason
Low battery warning
admin
user
admin
user
admin
user
(1) The swich selects“admin” mode
(2) Press "S" 5 times, motor rotates once.The match is deleted.
