01
– 10 - 2013
980108002-09-003
5. To exit enrollment mode, press the siren button (indicator turns off).
If the indicator fails to flash after the two reset beeps, it means that the siren is
within radio range of the control panel to which it has been previously enrolled.
In such a case, all devices previously enrolled to the siren have been deleted
except for the control panel. If you deliberately do not want to use the siren with
the control panel anymore, it must first be deleted in the control panel before
resetting the siren (in control panel enrollment mode select the siren’s address
and press and hold key 2 on the system keypad to delete the siren).
Indicator functions
In normal use, the indicator flashes when the doorbell button is pressed or
when the siren sounds. If the siren is enrolled to an OASiS control panel, then it
indicates the status of the programmable output PGY with a continuous light.
The indicator flashes in enrollment mode.
Technical specifications
Power supply
230V/50Hz, 1W, class protection II
Communication band
868 MHz, OASiS protocol
Communication range
approx. 100 m (open area)
Sounds (melodies)
8 selectable for buttons and detectors,
and an alarm siren sound 95 dB / 1 m
Max. number of enrolled devices
1x OASiS JA-80 control panel
8x OASiS wireless buttons and detectors
Safety class
II according to EN60950
Operating environment
general, indoor
–10 to +40 °C
Housing
IP40 according to EN 60529
Mechanical immunity
IK08 according to EN 50102
Operating conditions
ERC REC 70-03
The JA-80L complies with ETSI EN 300220, EN 50130-4, EN 55022 and EN 60950-1
