Page 29
Note:
The user will have to press the
START/STOP
key, after the mandatory
1-minute drying, to clear the message and unlock the door.
3.2.3. Screens showing a High-Pressure Failure AFTER a completed
sterilization stage
The sterilization stage ended successfully, however the chamber
indicated that there was high pressure during the exhaust phase.
This resulted in the following sequence of screens showing the
reason for the aborted cycle.
Note:
The user will have to press the
START/STOP
key, after the mandatory
1 minute drying, to clear the message and unlock the door.
3.3.
Screens showing a failed cycle BEFORE completing the
sterilization stage:
When the machine fails
BEFORE
the sterilization phase is completed
the display becomes yellow, a warning sign
and the reason for the
failure will appear.
Note:
There is a mandatory 1 minute of drying at the end of any aborted
cycle.
An explanation of how the display screen will look when a cycle has
failed:
