Tuttnauer ELARA11-D, Technicial Manual

Page: 56 / 176

Page 55
Browse to the following folder:
System parameters\Temperature calibration low
Change the parameter as desired
Cycle Print Gap
This parameter defines the time interval between printing the current values of
the cycle (See the printer output section).
Browse to the following folder:
System parameters\Cycle Print Gap
Change the parameter as desired
9.7
Inputs/Outputs
It is important for the technician to control the system down to the level of
specific inputs and outputs. Viewing the outputs state at specific stages of the
cycle helps you diagnose the malfunctions. You can also test and calibrate
inputs and outputs.
Below is the typical screen for viewing/testing the inputs/outputs.
Below is the instruction for working with inputs/ outputs.
View digital inputs state
In this menu you can view, at any stage, which digital inputs are being
controlled at the moment.
www.shanghaidelan.com 021-54263653