Tuttnauer AMS10-120-T, Operation And Maintenance Manual

Page: 68 / 104

Warning!
The sterility of the instruments processed in unwrapped cycles
cannot be maintained if exposed to non-sterile environment.
8.11 Checking Waste Water Level
When the waste water level is high, the general alarm symbol will appear.
A relevant text alarm will appear in the alarms list. This situation is normal, but
the operator cannot run a new cycle before draining the waste water reservoir
(see Draining the Reservoirs in section 8.11).
8.12 Draining the Reservoirs
This procedure applies to the mineral-free water reservoir (left) and to the
waste-water reservoir (on the right).
Note: Improper Water level icon appears when the water reservoir needs
to be filled or drained .
The drain valves are located on the front right side of the autoclave after the
door is opened.
To drain the reservoir:
1. See item (5) with the plastic hose (6) attached to it (supplied with
the autoclave).
Page 61