14
15
www.tuttibambini.com
www.tuttibambini.com
The Harness
The Harness
1. Fastening the harness
Slot the two plastic sections of the buckle
connectors together.
Slot the two connectors into the hole in the top
of the buckle until they ‘click’ into place.
Caution
: Put the two buckle tongues together
and engage in the harness buckle with an
audible click! click!
Always check the harness is correctly locked by pull-
ing above and below the buckle.
Caution
: Tighten the straps until they are in contact
with your baby’s body. The hip belt must lie as low as
possible over your baby’s hips.
The harness should be adjusted as tightly as possi-
ble without causing discomfort to the child. A loose
harness is dangerous and should be checked each
time that you use the seat. To tighten the harness, pull
down on the adjustment strap untill the harness is the
correct tightness.
Caution
: Pull on the adjusting straps until the harness
lies flat and is in contact with your child’s body. Pull
out the adjusting strap straight. There should never be
more than one finger’s width of space between the
shoulder straps and your child’s shoulders.
The harness is loosened by pulling on both straps at
the same time press down on the harness adjuster.
2. Unfastening the harness
To release the harness, push the red button in the
middle of the harness buckle inwards. You can now lift
your child from the seat; ensure that the buckle con-
nectors do not catch on clothing..
