Tutti Bambini ByGo Assembly Instructions Manual Download Page 5

2. Unfastening the harness

 
To release the harness, push the red button in the 
middle of the harness buckle inwards. You can now lift 
your child from the seat; ensure that the buckle con-
nectors do not catch on clothing.. 

8

9

www.tuttibambini.com

www.tuttibambini.com

Correct Shoulder Height

The Harness

The harness should be adjusted as tightly as possi-
ble without causing discomfort to the child. A loose 
harness is dangerous and should be checked each 
time that you use the seat. To tighten the harness, pull 
down on the adjustment strap untill the harness is the 
correct tightness.

Caution

: Pull on the adjusting straps until the harness 

lies flat and is in contact with your child’s body. Pull 
out the adjusting strap straight. There should never be 
more than one finger’s width of space between the 
shoulder straps and your child’s shoulders.

1. Before the car seat is installed  

   in the vehicle

 
The harness has 2 positions. The straps should go in 
to the slots at, or nearest slots above the height of the 
childs shoulders. To adjust the harness, remove each 
strap by passing it through the slots from the front 
to the back of the seat; re-route the straps through 
the appropriate slots. If the shoulder height is not ok, 
please re-install the seat again.

TOO LOW

The harness is loosened by pulling on both straps at 
the same time press down on the harness adjuster.

3

7

7

TOO HIGH

CORRECT

Summary of Contents for ByGo












Reviews: