Ryton
Polyester
Fluorocarbon
400 Series Stainless Steel Teflon Coated Aluminum
The superiority of Sotera Systems Series 900 meters is proven
by their listing with:
Underwriters Laboratories Inc., a
nationally recognized independent
organization for testing of products to
ensure public safety.
Canadian Standards Association, a
Canadian organization for testing of
products to ensure public safety.
Liter registers
1-1/2" NPT inlet/outlet ports
Design Features:
1" or 1 1/2" NPT female inlet and outlet ports
Recommended for 6 to 40 GPM / 23 to 151 LPM
output
±2% accuracy
50 PSI maximum pressure
Meters fluid at temperatures from -15°F (-26°C) to 150°F
(66°C)
Weatherproof, corrosion resistant
Large 11/16" register figures
Measures flow to 1,000 gallons in 1/10 increments
Easy to read totalizer registers to 1,000,000 gallons
Compact design: 8 1/2" x 6 1/2" x 5 1/2"
Convenient, large reset knob
Self-lubricating
Not for resale use
Fluid Compatibility
If in doubt about compatibility of a specific fluid, contact supplier
of fluid to check for any adverse reactions to the following wetted
materials.
Meters are furnished for horizontal piping; left to right flow unless
otherwise specified. Flow parts can be located in any of four
positions for horizontal or vertical piping and for either direction
of flow.
The Sotera Systems Series 900 Meter is a nutating disc flow
meter. The meter uses wheel counters for registering either
U.S. gallons or liters. The U.S. gallon meter has three unit
wheels and a tenth wheel which can be reset to zero. Its
totalizer has seven unit wheels and a tenth wheel. The liter
counter has four unit wheels which can be reset to zero. Its
totalizer has eight unit wheels.
INSTALLATION
QUALITY
OPTIONS
2
GENERAL DESCRIPTION
TECHNICAL INFORMATION
Dear Sotera Customer,
Thank you for buying a Sotera product. Sotera Systems
represents a new age in chemical handling products. This
service guide contains valuable information about your new
equipment and its operating and service requirements.
Please take a few minutes to review this material carefully.
Sotera Systems' mission is to provide chemical handling
products for ag-chem users that provide the most accurate,
safe, convenient and economical way to transfer chemicals.
If, for any reason, any of the products do not meet your
performance expectations we want to hear from you. Your
comments and suggestions are requested and appreciated.
Thank you again for buying a Sotera Systems product. We
look forward to serving you in the future.
Sincerely,
Ron C. Bulloch
Vice President, Sales
SAFETY INSTRUCTIONS
To ensure safe and efficient operation, it is essential to
read and follow each of the following warnings and pre-
cautions.
1.
Improper use or installation of this product can
cause serious bodily injury or death.
2. Do NOT smoke near meter or use meter near an
open flame when dispensing flammable fluids. Fire
could result.
3.
CAUTION: DO NOT INSTALL ADDITIONAL
FOOT VALVE OR CHECK VALVE DURING
INSTALLATION WITHOUT PRESSURE RELIEF
VALVE. CRACKING MAY RESULT.
4. Agricultural herbicides flowing through the meter
may be harmful to your health. Use and disposal
of these products is controlled by federal, state or
local laws and procedures.
5. Conform to fluid manufacturer's recommended
handling procedures when using product and
when cleaning meter.
6. Do not exceed 50 PSI / 3.5 BARS line pressure.
