13
Manual 1865 Rev B p/n 001865 0000
For your convenience, Tuthill has prepared a
variety of kits to serve all levels of routine and
atypical maintenance of your KVA vane pump.
Pump Module
This is an assembled bare pumping chamber,
including items 1-66 (as applicable); see Exploded
Views and Parts Lists on the following pages for
details.
A pump module is often an economical option to
replacing a pump, which reuses the existing oil-
handling assembly, motor, and accessories, while
replacing the rotating components and pumping
chamber.
Rebuild Kit
This kit includes (as applicable): a full set of vanes,
o-rings, filters, gaskets, bearing, bearing sleeve,
shaft seal, coupling boot, and inlet screen.
Gasket Kit
This kit includes (as applicable): shaft seal, end
plate o-ring, oil fill o-ring, oil drain o-ring, exhaust
filter o-rings, oil sump gasket, service cover gasket,
exhaust cover gasket, exhaust valve seat, cylinder
gasket, check valve plate o-ring, float valve o-ring.
Filter Kit
This kit includes (as applicable): a full set of
exhaust filters, oil filter, oil fill o-ring, oil drain o-ring,
exhaust filter o-rings, cover gasket, baffle strainer.
Coupling Kit
This kit includes (as applicable): the motor- and
pump-side coupling halves and cooling fan.
Inlet Check Valve Kit
This kit includes (as applicable): inlet screen, inlet
flange, o-rings, check valve spring, check valve
guide, check valve plate.
Vanes
Sold individually, three required per pump; a full set
is included in the Rebuild Kit.
Exhaust Filters
Sold individually, refer to Item 120 in the relevant
Parts List on the following pages for quantities; a
full set is included in the Filter Kit.
Spin-On Oil Filters
Also included in the Filter Kit.
Shaft Seals
Also included in the Rebuild Kit.
08
EXPLODED VIEWS AND PARTS LISTS