background image

.1.

Safety Is Very Important

Close-up View (Control Panel)

A

B

Power Light

Power Button

Dial For Selecting Cycle

Handle For Opening Door

C

D

Carefully read the instructions contained in this manual, as it pro-

vides information that is essential to safe and proper installation,

use and maintenance of this appliance.

     

This appliance complies with the following EEC

directives:

-73/23/EEC of 19/02/73(Low Voltage)and subsequent

modifications;

-   8 9 / 3 3 6 / E E C   o f   0 3 / 0 5 / 8 9   ( E l e c t r o m a g n e t i c

Compatibility) and subsequent modifications.

- Carefully remove and dispose of the packing material.

- Check to make sure that the appliance is not damaged. If in

  doubt, contact the retailer it was purchased from.

- This dishwasher is designed for washing household dishes and

  cooking utensils.

- Do not install this appliance outdoors, even if a roof covers the

  area.

- Do not lean or sit on the door when it is open, as it may overturn

  the dishwasher.

- Do not touch the heating element during or after a wash cycle.

- If the appliance malfunctions, turn off water supply to the appliance

  and disconnect the plug from the wall socket and refer to the

  section entitled, "Troubleshooting". If you cannot solve the problem,

  contact an authorised service centre/agent.

- Only selected service centres/agents are authorised to make

  repairs.

- If the supply cord is damaged ,it must be replaced by the

  manufacture, a service agent of similar qualified persons in order

  to avoid a hazard.

- The appliance is not instruct for use of young children of infirm

  persons without supervision. Young children should be

  supervised to ensure that they do not play with the appliance.

- Dishwasher detergents are strongly alkaline. They can be

  extremely dangerous if swallowed. Avoid contact with the skin

  and eyes and keep children away from the dishwasher when the

  door is open. Check that the detergent receptacle is empty after

  completion of the wash cycle.

- Do not use extension cords or multiple sockets.

- The plug must be accessible after installation.

- During installation the power cord must not be bent or flattened

  excessively.

- If the appliance is not operating properly,disconnect the

  appliance from the power supply.

Warning: Dishwasher detergents can be extremely danger-

ous if swallowed.Avoid contact with skin, eyes and keep chil-

dren away from the dishwasher when the door is open. Check

that the detergent receptacle is empty after completion of

the wash cycle.

To maintain the EFFICIENCY and SAFETY of this appliance:

- Only call a authorised service centre.

- Always use original Spare Parts.

- Children and infirm must be supervised at all times during use of

  the dishwasher by an adult.

Summary of Contents for DW100T












Reviews: