Turtle Tough TT-TOUGH-DO-M4M Manual Download Page 7

TURTLE

TOUGH

®

 

7

Specifications 

Product name

M4M TOUGH Dissolved Oxygen System – Portable

Code

TT-TOUGH-DO-M4M

O₂-Measuring ranges

0.0 – 40.0 ppm dissolved O2 / 0 - 400%

O₂-Accuracy

± 0.5 % of full-scale point

°C-Measuring rang

0.0 – 50.0 °C

°C-Accuracy

± 0.1°C, automatic temperature compensation

Recorder outputs 

2 simultaneous

O2 : 0.0 – 40.0 ppm / 0 - 400 mV

°C: 0.0 – 50.0 °C / 0 - 500 mV

Power supply

240 V AC / 50/60 Hz - 1.8 VA Battery with integrated charger

Burden

> 100KΩ

Fuse

0.3 A

Display

13 mm high, 3-1/2 digit LCD

Sensor

TT-TOUGH-DO-M4M

Calibration

Air calibration in the atmosphere

Housing

IP 65, PVC housing 

Dimensions

200 x 270 x 250 mm (H x W x D: approx.) 

Weight

2.3 kg approx. 

Field case 

385 x 355 x 180 mm (H x W x D) approx. Weight 1.5 kg approx.

Unpacking

• 

Please have a copy of your order with you when you unpack your instrument. 

 

All orders are checked when they leave the factory. 

• 

Please check that you have all the parts that were ordered as soon as you open the box.

• 

If anything is missing or damaged, please contact your sales outlet immediately. 

• 

If the instrument needs to be returned for any reason please follow the return instructions given 
in this manual.

• 

Please dispose of the packing in an environmentally responsible manner and  in compliance with 
local regulations.

Danger 

Electric 

 

Shock

Hazard

Important

Summary of Contents for TT-TOUGH-DO-M4M


















Reviews: