12
Go to Table of Contents
Pairing the Headset and Transmitter
The Stealth 420X Wireless Transmitter sends audio and chat between your game console and your
Headset via digital radio frequency signal, so a direct line of sight is not required. When the headset
and transmitter are communicating, the Connection Status LED on the Wireless Transmitter will stay
lit.
NOTE:
Your Stealth 420X Headset ships already paired for communication with your Wireless
Transmitter. In normal operation, it should not be necessary for you to pair the two again. You
should only need to perform pairing yourself in the event that wireless communication fails. First
check that the headset is powered on and is within range. If the Connection Status LED on the
Wireless Transmitter is still pulsing, the Wireless Transmitter can’t communicate with the Headset.
Perform the following pairing procedure.
3. Press and hold the Power Button on the Headset until the headset Charge/Pairing Status LED flashes rapidly and
the Headset announces “Pairing”.
4. Within a few seconds the Connection Status LED on the Transmitter and the power LED on the Headset will turn
Solid. The Headset will also announce “Headset Paired” to confirm that pairing was successful.
2. The Pair Button on the Transmitter is recessed in a pinhole to prevent accidental operation. Insert a paperclip(or
something similar) into the pinhole until the transmitter’s Connection Status LED flashes rapidly.
1. The Headset should be powered OFF. If it’s on, press and hold the Power Button on the right Earcup for five seconds
to power OFF.
