14
Bluetooth setup and Operation
dual Pairing
The i30 can be simultaneously paired to two Bluetooth-enabled devices at once. For example, you can pair the i30 to a
digital music player or tablet and your mobile phone at the same time. If your mobile phone is also a digital music player,
you can stream music to your headset as well. The i30 will automatically remember the last two paired devices upon
powering on.
NOTe: Only one Bluetooth device can be active on the headset at a time.
For example, if you are making a call with the
headset while streaming music from a second device, the music will be turned off until the call is over.
Making Calls with your iPhone
Once the i30 is successfully paired with your iPhone, you can use the headset to make and receive calls.
When idle or on
a call the Bluetooth LED will blink Blue.
if you want to…
Then…
Activate voice dialing.
Press the Bluetooth button three times.
Use iPhone keys to make a call.
Double-click Bluetooth button.
Redial last number.
Double-click Bluetooth button.
Turn off the microphone.
Press the Mic Mute button. Press again to turn the microphone back on.
Adjust the volume.
Press the Bluetooth Volume Up and Down buttons.
End a call.
Press the Bluetooth button once.
NOTe: Media Audio will be lowered automatically during the call.
receiving Calls
When the i30 Bluetooth is powered on and there is an incoming call you will hear a musical chime or your default phone
ring tone.
if you want to…
Then…
Accept a call.
Press the Bluetooth button.
Reject a call.
To send the call directly to your voicemail, press and hold the
Bluetooth button for three seconds until you hear a beep. You can also
do nothing, which will send the call to voicemail after the programmed
number of rings.
End a call.
Press the Bluetooth button.
