Page 5 of 9
TS40005EM Rev C
6.
Attach Receivers
Gently push receivers into the receiver holders. Attach RH and LH
receiver cables to receiver ends and route cable as shown.
7.
Connect Cables
Connect the LH and RH receiver cables to the LH and RH terminals
as marked on the controller. Connect the user interface cable to the
controller terminal marked UI.
8.
Attach Controller
Using the prepunched locating holes, attach the controller box
approximately 8 inches below the top plate as shown. Mount the
controller box using three (3) 8-18 x .750 sheetmetal screws. Turn
screws until tight.
LH
RH
PRINTER
POWER
USB
RH
LH
UI
PRINTER
POWER
USB