Page 2 of 3
TS3450102 Rev B
3.
Insert cylinder into base
With base resting on floor, insert
cylinder as shown.
4.
Assemble cylinder cover
Slide cylinder (A) up through cylinder (B)
(see fig 1). With cylinder (A) engaged with
cylinder (B), slide cylinder (C) down over
cylinders (A and B) (see fig 2). Refer to
fig. 3 for completed assembly.
5.
Place cover over the cylinder
6.
Insert the lower end of the gas
cylinder into the base, and the
upper end through the
telescopic bell, into the seat
control. Sit on the chair, pull up
the control lever several times
until the gas cylinder is activated
and the chair seat will go down.
fig. 1
fig. 2
fig. 3
A
B
A
B
C
A
B
C
