Page 5 of 6
939504514 Rev F
Arm Replacement
1.
Adjust chair to maximum seat height.
2.
Turn chair upside down and set on stand or table.
3.
Remove screw from the stretcher. Pull out arm and replace.
(May require tapping arm with rubber mallet.)
IMPORTANT - SET TORQUE OF SCREWS TO 175 -200 IN/LBS.
Note: Turn chair upsidedown and look for a lable with build
schedule information on it. Note the schedule number. For chairs
built on schedule 35, use the 1/4" dia. screw to install a
replacement arm. For chairs built on and after schedule 36, use
the 5/16"dia. screws.
Remove
Screw
Pull out
Arm
