REMOVE OLD STYLE REAR LEGS AND
INSTALL NEW STYLE REAR LEGS
1.
Flip chair upside down.
2.
Remove the two (2) flat head wood
screws and save for later.
3.
Flip chair upright.
4.
Push down on the back of the seat so
the front of the seat rotates up (4a). Lift
the seat out (4b).
5.
Remove the washer and nut from the
inside of the chair (5a). Remove the old
style rear legs (5b).
6.
On the inside of the chair, install t-nuts
in the holes that are closest to the middle
of the chair with a hammer.
7.
Install new style rear legs as shown on
page 1.
8.
Install seat by reversing step 4.
9.
Flip chair upside down as shown in
step 1.
10.
Reinstall the two (2) that were
removed in step 2.
1
3
4a
4b
5a
5b
6
SEAT
WASHER
NUT
T-NUT
OLD STYLE
REAR LEG
Page 2 of 2
1024227001 Rev A
OLD STYLE
REAR LEG
ORDERED PRIOR
TO FEB. 15, 2016
NEW STYLE
REAR LEG
ORDERED ON OR
AFTER FEB. 15, 2016
2
FLAT HEAD
WOOD SCREW
