6 |
P a g e
1.
Open the browser on the kiosk
2.
Enter the URL exactly as it was sent to you (case sensitive)
3.
WeTransfer will open - scroll down and hit download.
4.
Once the download is complete go back to the home screen and hit the
file explorer
5.
Internal memory
→
downloaded
→
the apk file that you have downloaded
6.
Read through the instructions on the window that pops up and hit next
then hit install
7.
The kiosk will now prompt you to open the new app!
Before you start getting the office to line up to test out the new device,
unplug it and wait 10 seconds and plug it back in.
Once it is rebooted the application should open on start up. Open the settings
and adjust the toggle switches for whether you want mask detection and if
you want a badge printed, also set the location- this can just be the name of
the company.
Once it is all set there is no need to touch the kiosk- just present your face to
have your temperature screened then you will be checked for mask
compliance. Kiosk is interactive so it would tell you to try again with a mask if
you started the check in process without one.
The developers have hidden the home button to deter visitors from going
back to play in the settings so if you want to exit the application wait for the
home screen and press and hold the “T” in the ZKTeco logo. It will bring you
back one page to the setting screen, press and hold the “T” again and it will
take you to the home screen of the kiosk for any updates or changes you need
to make.
Testing Your New Application
Installation using the Browser
**
This method will require an
Ethernet
connection
