12
turnongreen.com
2. Locate the stud closest to the NEMA 6-50 socket on which you wish to
mount the EV700. The mounting bracket allows for vertical or horizontal
screw installation.
2a. If your stud is visible, add an additional stud for
horizontal and verticle screw applications.
2b. If you are mounting on sheet rock wall, we recommend
using a 50lb hollow wall anchor at all four anchor points.
1. The bracket will need to be mounted independently of the EV700
charging device. Remove the joiner screw on the bottom side of the
device to separate the bracket.
Mounting the EV700
3. Place the mounting bracket
against the wall between 39-43
inches (990-1092mm) above
the ground.
4. Make sure the bracket is
evenly mounted using a level
tool, and make markings with a
pencil.
5. Drill pilot holes for each anchor screw.
6. Install the mounting bracket using the washers, and anchor screws.
39-43”
