Ⅰ
ESC Features
·
Microprocessor controlled,
extremely low resistance
·
Water-proof PCB, and aluminum water-cool thermal dissipation
·
Full protection soft, include signal lose protection, temperature protection, motor block-up protection.
·
Fully program by software on computer, or by
Turnigy
®
LCD program box, or by TX stick
·
The firmware of the ESC is upgradeable from Internet as the new version of the software becomes
available.
·
Compatible to use with both general board transmitters and pistol transmitters with programmable brake
setting for any competitions.
П
Specifications
Ш
Using the ESC
- Please solder good quality golden bullet connectors to the wires of brushless motor and the three motor
wires of ESC. Connect the ESC ‘s three motor wires to the brushless motor, swapping any of the two
motor wires connection can change the motor’s rotating direction.
- The quality and discharging capability of battery pack will influence the efficiency and rpm of motor.
Please solder high conductive T connectors to the battery’s (+) and (-)wires.
- Plug the receiver lead (small color wires )of ESC to the receiver (Usually Ch 2).
Models
90A
120A
Voltage
2~6 cells Lithium-Polymer OR
6~20cells NiCad/NiMH
2~6 cells Lithium-Polymer OR
6~20cells NiCad/NiMH
Current/max
90amp continuous/110 amp surge
120amp continuous/150amp surge
BEC
5V, 3.5A switching BEC, max 4A
5V, 3.5A switching BEC, max 4A
Dimensions
90mmx36mmx20
mm
90mmx36mmx20
mm
97g (excl. cables)
100g (excl. cables)
Weight
Connect ESC to motor, receiver and battery
TURNIGY AQUASTAR ESC MANUALS 2 page / 12 pages
