Turin Networks TransNav, Installation And Commissioning Manual

Page: 129 / 362

Release TR3.2.1 Turin Networks Page 6-15
SECTION 6PRECAUTIONS AND COMMON PROCEDURES
Chapter 3
Inserting and Removing Cards
Introduction
This chapter provides basic step-by-step instructions for inserting and removing cards
in a Traverse shelf. Refer to this chapter as required while completing the Traverse
Installation and Commissioning Guide procedures.
•
Required Equipment and Tools , page 6-15
• Clean Cable and Card MPX Connectors , page 6-16
• Insert a Card , page 6-19
• Remove a Card , page 6-23
For a card placement example, refer first to Section 1— Installation Overview ,
Chapter 2—“Traverse System Configuration Examples,” Example Traverse Shelf
Card Layout , page 1-5.
Exact placement of the cards into Traverse shelf slots is explained in
Section 12—
Appendices , Appendix A—“Card Placement Planning and Guidelines,”
page 12-1.
Required
Equipment and
Tools
The following equipment and tools are required to insert and remove cards:
•
Card
• MPX cleaning materials to clean fiber optic cable and module MPX connectors:
– Isopropyl alcohol of at least 91% purity
– Lint-free wipes
– Lint-free cleaning swabs with urethane foam heads
– Pressurized optical duster (canned air)
• Electrostatic Discharge (ESD) wrist strap