16. For full cleaning process: Repeat steps 6 – 12 above. (Paint surplus can be either
sprayed on to grass area or deposited into waste bottle (empty out intermittently).
17. Additional periodic cleaning: From time to time clean the ATOM using tap water
drawn from a 10L empty (clean) paint container. This ensures cleanliness of suction
tube & filter.
18. Nozzle cleaning: Following ATOM cleaning always remove & clean the ‘top-hat’
filter above the nozzle. Ensure clean & clear water is seen spraying from the nozzle.
For additional nozzle cleaning soak overnight using ‘Bowcom Multi-flush solution’,
preferably in an ‘ultra-sonic’ cleaning bath.
19. NB. If using a part-used pail of ‘Atom’ or ‘Quantum’ paint, shake well before use.
20. Battery Charger: Use Battery Charger provided. Place 3-pin plug into 240 volt mains
socket. Plug other end (12 volt) into trailing socket inside the ATOM Control Box
(connector fits only one way). A full charge will take up to 10 hours. Full battery
should operate pump for several days (dependent on use).
03
Technical Information:
Paint tank capacity . . . . . . . . 10L
Water bottle capacity . . . . . 0.5L
Weight - Dry, No tank . . . . . 22kg
