Preparation for usage
Insertion and removal of the spray tube
Insert the power plug of the water floss device into the power supply.
Once the water tank is filled with water, place the water tank back into the
device, as well as slightly press on top. Ensure that the rubber seal of the
water tank base is aligned with the rubber seal of the device base.
When inserting the jet tip into the handle, you should hear a crisp clicking
sound. When removing the jet tip from the handle, you only need to lightly
press the disassembly button of the jet tip, and remove the jet tip from the
handle.
4
Water pressure adjustment
When you hear a click while turning the on-off switch, this indicates that the
device has been switched on. Turning in a clock-wise direction will increase
the water pressure. If the device is switched on for more than 3 minutes, the
device will automatically turn off. For the next time switching on, it is
necessary to rotate the on/off switchback until a clicking sound is heard, then
turnit in a clockwise direction again.
Using the Oral Irrigator
Place the jet tip in the oral cavity and direct it towards the teeth. The other
hand switches on the device, and sets the pressure at the required value (it is
recommended to use the minimum pressure for your first use). The direction
of the water flow can be controlled by rotating the 360 degrees button on the
top of the handle.
Usage Technique
When the water flow and the gums are at a 90 degree angle, slightly close
your mouth in order to avoid the water spraying out, yet let the water flow from
the corner of the mouth into the sink. In order to achieve better cleaning
results, please start flossing from the molars to the incisors. Let the jet tip
lightly shift along the gums, and pause briefly between teeth. When water
flossing teeth, let the water flow pass through the gaps between the teeth.
Repeat the same methx
5
Summary of Contents for FC162
Page 1: ...Model No FC162...
