3- Pair it with Mac
– choose setup Bluetooth Device from the Bluetooth status menu in the menu bar, and
follow the onscreen instructions to pair with the speaker. If the Bluetooth status menu is not available,
open Bluetooth Preference and select the “Show Bluetooth status in the menu bar” checkbox. Depending
on the pairing process, you may need to enter a passkey (0000).
4- Open System Preferences and click Sound.
5- Click Output and select the Bluetooth speaker.
6- Click Input and select your speaker. Adjust the Input and Output volume.
Pairing HR903 via NFC function with NFC enabled devices
1- Turn on HR903
2- Enable NFC and Bluetooth on your phone (NFC settings may be found under your devices'
"More/Additional Settings")
3- Lightly swipe your phone on the NFC logo on top of device, while making minimal contact. The indicator
will turn solid ON when the device and speaker have successfully paired.
4- "Compatibility: Most smartphones with NFC running Android 4.1 "Jellybean" and later.
Re-connecting to a paired device
Each time HR903 is turned on, it has 2 options:
1- Connect to last connected devices automatically, then just start music playback.
2- Listed in the screen of devices as an output channel, then select HR903 Bluetooth Speaker as output
channel and play music.
PLAY/ PAUSE /HAND-FREE, NEXT/PREVIOUS
When HR903 is playing music via Bluetooth
1- Press PLAY/PAUSE/HAND-FREE to stop music.
2- Press again to restart music.
3- Press NEXT to go to next song.
4- Press PREVIOUS to go back to previous song.
When there is an incoming call while HR903 is playing music via Bluetooth
1- Press PLAY/PAUSE/HAND-FREE to answer the phone call.
2- Press again to end the call.
Power-
Bank: Use the “USB OUT” port to charge your mobile devices via HR903’s built-in battery.
1- Turn on HR-903
2- Connect HR903 with mobile devices via cable
3- LED blinks slowly in Green color when charging, turns off after mobile devices are fully charged.
Volume control
1- Control volume via the Bluetooth device itself.
2- Control volume via the /- buttons located on top of Speaker.
AUX port
1- AUX port can connect to any music devices via the AUX cable (included).
2- LED changes to Yellow color after AUX port plugged.
3-
Play music through the device connected.
4- HR903 will turn off itself to save power if left idle for 10 minutes.
Water-Resistant
1- HR903 is compliant with IPX5
waterproof standard “splash proof in all directions”.
2- USB cover located on rear side of HR903 must be CLOSED.
3- Do not place HR903 under water jet or submerge into water.
