16 |
P a g e
SD card setting:
IMPORTANT: the first time you use your SD card you must FORMAT it by
plugging it into your camera, going to this SD card setting menu and
scrolling to the bottom where you see “SD card formatting” Click that and
wait until you see the status of your SD card to go from “formatting” to
“SD card already inserted”. You may have to click “Done” and then go back
to the page to check the status
SD card status
o
Memory capacity (# of MB or GB)
o
SD card inserted or not inserted
Video setting
o
Record coverage
Will record your video stream constantly
o
Audio recording
Will record your audio stream constantly
o
Timer recording
Will record the time constantly
SD card formatting
o
This will only appear if you have an SD card already
plugged in.
ONVIF Setting:
ONVIF specification is the standard for exchange of information between video devices including video
streaming and intelligence data. It is the standard method of exchanging information over networks (WiFi
for example) safely and efficiently.
Allow open ONVIF (Open Network Video Interface Forum) – On or Off
Allow open RTSP (Real Time Streaming Protocol) – On or Off
o
Advanced video streaming for faster frame rate and
higher quality. It is recommended that this stays ON
RTSP port – 10554
(only advanced users should
alter this value)
