turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Instructions For Use Manual

Page: 122 / 165

Properties of the Universal Standard I/O Channels (DXP Channels)
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 4
2.1 Supply of the Universal Standard I/O Channels
2.1.1 Safe Shutdown
The both DXP channels are supplied via the internal safe input FSO 0.
This allows a safe shutdown of the connectors C4 and C5.
2.2 Technical Data
Power supply 24 V DC
Permissible range 20.4 … 28.8 V DC
Sensor/actuator supply V
AUX1
via FSO 0
Digital inputs
Number of channels
4
Input type PNP
Switching threshold EN 61131-2 type 3, PNP
Operating current
< 100 mA
Signal voltage, low level < 5 V
High level signal voltage > 11 V
Low level signal current
< 1.5 mA
High level signal current > 2 mA
Input delay 0.2 ms
Input frequency
400 Hz
Sensor supply
–
C4, C5: FSO 0 max. 2A; 500mA per input
–
C6: VAUX1 max. 2 A
–
C7: FSO 1 max. 2 A
Derating, see Part 1: Derating curves (page 19)
Potential isolation galvanic isolation to P1/P2
voltage proof up to 500 VDC
Digital outputs
Number of channels 4, DC actuators
Output type PNP
Output current per channel 0.5 A short-circuit-proof,
max. 2 A (ohmic)/

1 A (inductive) over all standard outputs
Output voltage 24 VDC
Load type
ohmic
Simultaneity factor 1 for entire module,
overall current max. 2 A at FSO 0
Actuator supply
–
C4, C5: FSO 0 max. 2A; 500mA per output
–
C6: VAUX1 max. 2 A
–
C7: FSO 1 max. 2 A
Derating, see Part 1: Derating curves (page 19)
Potential isolation galvanic isolation to P1/P2

voltage proof up to 500 VDC