V01.00 | 2021/06
7
3
For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended use
These devices are designed solely for use in industrial areas.
The IM18-CCM51-12I current measurement module is an additional module for freely program-
mable cabinet guards of the IM18-CCM50… series. Up to twelve split core ferrite AC current
sensors of the CCT series can be connected to the current measurement module. The device
processes current sensors with a measurement range of 30…600 A and measures the signal fre-
quency of the sensors.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
Obvious misuse
n
The device is not a safety component and must not be used for the protection of persons
and property.
3.3
General safety instructions
n
The device only meets the EMC requirements for industrial areas and is not suitable for use
in residential areas.
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international regu-
lations, standards and laws.
n
The device must only be used in enclosed housing or control cabinets.