V02.00 | 2021/05
37
7.1.8
Switching on presence sensing mode
In order to use the Continuous presence sensing mode command, the Presence sensing mode
must be activated in the reader. In Continuous presence sensing mode, the readers are auto-
matically switched on as soon as a tag is located in the detection range.
Choose
Basic Setup
Ò
General
Ò
Device Mode
and set the
Presence sensing mode
option.
Fig. 36: Switching on presence sensing mode
The Advanced access level allows the
Tag data delay time
and
Carrier delay time
parameters
to be set individually.
n
Tag data delay time
: Time in which the reader searches for a tag. If a tag is found, the field is
switched on. In the Basic access level, the parameter is set by default to 100 ms.
n
Carrier delay time
: Time until the reader switches off the field after the last read operation.
In the Basic access level, the parameter is set by default to 65535 ms.
NOTE
Report mode is recommended for the RFID test since the read tag information items
appear in the RFID test window and do not have to be polled individually.
Summary of Contents for 100000897
